Back to support
Connecting the Network IP camera directly to your MAC for initial setup
Step 1 - Connect the camera
Most routers, including AirPort, will have DHCP turned on. DHCP is a protocol for assigning dynamic IP addresses to devices on the local network meaning that if you plug the Network Camera into your router it will be given an IP address automatically, since DHCP is the default mode for the network camera.
Crossing over
At times, the router is not accessible for 'wired' connection, so instead, what you need to do is plug the camera directly into your Mac. To do this successfully you have to use a crossover cable. A crossover cable is an Ethernet cable wired differently to allow two network devices to communicate directly without having to go through a router or switch on the network. This cable can be purchased from any computer store.
The first step is to connect your Network Camera to your Mac using a crossover cable and turn on the power to the camera and boot up your Mac.
Step 2 - Changing the IP address of your Mac
Important: Before you change the IP address of your Mac please make note of the original settings, as you will need to change back to those to regain access to your network/internet.
Connect to the internet. Adjust the volume. Change your display's brightness. Take a screenshot or screen recording. Control access to your camera on Mac. Some apps and websites can use your camera to take photos or video. You can decide which apps are allowed to use the camera on your Mac.
Why do I need to change the IP address of my Mac?
Well without getting too complicated, if your Mac is on a different range of IP address (subnet) than the Network Camera then you will not get a connection to the camera.
- How to turn on the camera on a Mac computer. Turning on the camera on a Mac is easy: just start using an app that calls for photo or video. These include Photo Booth, FaceTime, Skype, and others.
- To Turn on Camera on a Mac: Open Finder on your Mac, click on the Applications folder, and select Photo Booth. As soon as Photo Booth starts, the LED next to the built-in iSight camera should turn on, informing you that the camera is activated. How to Turn on Camera on Mac for Facetime.
- Jun 26, 2020 Follow the steps below to use a Mac app to turn on your computer's iSight camera. In the Finder, open the Applications folder. If the Applications folder isn't in your side menu, you can reach it by following the path Macintosh HD Users your account name Applications. Select an app that uses the iSight camera.
For example, the Network Camera has a default IP address of 192.168.168.100. The 192.168.168 part of the IP address is the ‘network' address and the .100 is the number associated with the ‘host', or device. If your local network has a network address of 192.168.0.x then it cannot communicate with any device on a 192.168.168.x network. So we need to put your Mac on the 192.168.168.x network so it is compatible with the Network Camera 's default IP address.
To do this open ‘System Preferences' by selecting it from the dock. You should be shown the following
Select the ‘Network' icon (highlighted) to edit your network settings. The following dialogue should open
Add Camera To Mac
This dialog box should show you all available networks you can use from your Mac. As the Network Camera is connected to your Mac using a cable we must choose the ‘Built-in-Ethernet' option. Select ‘Built-in Ethernet' and click the ‘Configure' button. This will open the following dialog.
We want to configure a static (so it never changes) IPv4 address so select ‘Manually' from the IPv4 drop-down box at the top of the dialog. This will allow you to manually enter your IP address details as shown below:
Use the following details in your Mac. These will allow you to communicate with the Network Camera using its default IP address:
IP address: 192.168.168.10
Subnet mask: 255.255.255.0
Router: 192.168.168.1
DNS Servers: Not important at this stage.
Search domains: Optional, leave blank, not important.
How To Use Mac Camera
Click ‘Apply Now' to save your changes and your Mac should now be set up ready to configure the camera.
Step 3 - Connect to your Network Camera
How To Connect Mac Camera
You should now be able to connect to your Network Camera using the Mac.
Open an Internet browser and use the following IP address to connect to your camera:
http://192.168.168.100
You will then be presented with the camera's splash-page like below:
Select the 'settings' option to enter the camera's setup pages.
When you access the camera for the first time it will ask you for a username and password. The default details for your Network Camera will be:
Username: admin
Password: admin
What you want to do is adjust the camera's IP address so that it is compatible with your local network. To adjust the IP address, select 'Network', then 'TCP/IP Setup' option from the menu on the right. This will open the network settings of the camera as below:
Copy setting as shown in the screen shot above.
Click 'Apply'
On your MAC laptop change the TCP/IP settings back to their original settings back instep 2. (or DHCP)
Open an Internet browser window and type the address http://10.0.1.100
Get adobe cc free mac. Click on 'Wizard' at the top right of the screen.
Follow steps as listed in thequick setup guide
Back to support
